For a vascular plant --> A sunflower, because they are apparently easy to grow and the smaller types begin to flower before 3 months.
For a non-vascular plant --> A liverwort, because they are more well-known than hornworts and they are also apparently easy to grow.
However, I will further investigate these types of plants when I go to the local "Flower Power" today. :)
FINALLY - A Good Way to Classify Plants
Posted by
Raychelle
/
Labels:
classification,
non-vascular,
plants,
slideshow,
vascular
/
Comments: (0)
I found a really good slideshow at:
http://www.slideshare.net/geonyzl/classifying-plants-based-on-climate-and-habitat-331230
It really helped me decide how I was going to do Part B of my experiment - I needed "different types" of plants, but I wasn't sure which classification method to use so that they would be "different". So I've decided to get rid of the flower, cactus, and "different types of plants" in that sense; and I have firmly resolved to classify the plants by the way they reproduct.
This is because the slideshow helped me realise that if I classify plants by their habitat, one or more of the test plants will always be at a disadvantage because I'm only growing them in one habitat - that is, if I grow a flower and a cactus in the same place (my backyard), the cactus will probably grow better than the flower because the cactus is very efficient in the use of water (since it comes from a desert habitat), whereas the flower is not as efficient at using water. Since I will give each plant an equal amount of water, the flower would thus would be at a disadvantage.
Also:
- Classifying plants by life span would be pointless, since I'm only growing them for about 2 and a half months, and the effect of the allelochemicals would not be aided/inhibited by life span.
- Classifying plants by "growth habit" or their structure (woody = trees; or herbaceous = green and leafy) would be pointless because I cannot grow trees in the short time period that I have, so I cannot compare the effect of allelochemicals on trees vs. the effect on green, leafy plants.
- Classifying plants by climatic adaptation would be pointless because I'm only going to grow the plants in one climatic area, meaning that one or more plants would always be at a disadvantage, just as in the habitat classification.
Therefore, it would be easiest to classify the plants by their method of reproduction.
Far Part A of my experiment, I will use:
- A bryophyte: A non-vascular plant
- A tracheophyte: A vascular plant
For Part B of my experiment, I will use:
- An angiosperm: A class of seed plants, having seeds enclosed in an ovary, and flowering - vascular
- A gymnosperm: A plant, such as a cycad or conifer, whose seeds are not enclosed within an ovary; not flowering - vascular
And maybe:
- A fungus (if I can manage to grow one somehow): An organism of the kingdom Fungi lacking chlorophyll and feeding on organic matter - non-vascular
- A chromista (also if I can manage to grow one): An algae - non-vascular
http://www.slideshare.net/geonyzl/classifying-plants-based-on-climate-and-habitat-331230
It really helped me decide how I was going to do Part B of my experiment - I needed "different types" of plants, but I wasn't sure which classification method to use so that they would be "different". So I've decided to get rid of the flower, cactus, and "different types of plants" in that sense; and I have firmly resolved to classify the plants by the way they reproduct.
This is because the slideshow helped me realise that if I classify plants by their habitat, one or more of the test plants will always be at a disadvantage because I'm only growing them in one habitat - that is, if I grow a flower and a cactus in the same place (my backyard), the cactus will probably grow better than the flower because the cactus is very efficient in the use of water (since it comes from a desert habitat), whereas the flower is not as efficient at using water. Since I will give each plant an equal amount of water, the flower would thus would be at a disadvantage.
Also:
- Classifying plants by life span would be pointless, since I'm only growing them for about 2 and a half months, and the effect of the allelochemicals would not be aided/inhibited by life span.
- Classifying plants by "growth habit" or their structure (woody = trees; or herbaceous = green and leafy) would be pointless because I cannot grow trees in the short time period that I have, so I cannot compare the effect of allelochemicals on trees vs. the effect on green, leafy plants.
- Classifying plants by climatic adaptation would be pointless because I'm only going to grow the plants in one climatic area, meaning that one or more plants would always be at a disadvantage, just as in the habitat classification.
Therefore, it would be easiest to classify the plants by their method of reproduction.
Far Part A of my experiment, I will use:
- A bryophyte: A non-vascular plant
- A tracheophyte: A vascular plant
For Part B of my experiment, I will use:
- An angiosperm: A class of seed plants, having seeds enclosed in an ovary, and flowering - vascular
- A gymnosperm: A plant, such as a cycad or conifer, whose seeds are not enclosed within an ovary; not flowering - vascular
And maybe:
- A fungus (if I can manage to grow one somehow): An organism of the kingdom Fungi lacking chlorophyll and feeding on organic matter - non-vascular
- A chromista (also if I can manage to grow one): An algae - non-vascular
Which plant to plant?
Firstly. I've decided to classify the plants in Part B by the way they reproduce. This doesn't seem very relevant to my actual experiment, but it seems to be a very common way of classification of plants, so I suppose it should be alright.
For example, there are angiosperms, who are flowering plants.
So, according to this site I've found, many fruits and vegetables are sensitive to allelopathy. A few are: apple, apricot, avocado, banana, pear, cauliflower, broccoli, watercress, cherimoya and spinach But are these easy to grow in your own back garden? I don't believe that apples are....they grow on trees. So no.
But the easiest looking ones are lettuce, watercress, tomatoes....nasturtiums, which are actually a type of flower! So right now I have a flower for Part B.
Also, according to a gardening resource, spinach plants are particularly easy to grow, as well as carrots. So maybe I'll try those.
For example, there are angiosperms, who are flowering plants.
So, according to this site I've found, many fruits and vegetables are sensitive to allelopathy. A few are: apple, apricot, avocado, banana, pear, cauliflower, broccoli, watercress, cherimoya and spinach But are these easy to grow in your own back garden? I don't believe that apples are....they grow on trees. So no.
But the easiest looking ones are lettuce, watercress, tomatoes....nasturtiums, which are actually a type of flower! So right now I have a flower for Part B.
Also, according to a gardening resource, spinach plants are particularly easy to grow, as well as carrots. So maybe I'll try those.
Interesting...
http://www.tis-gdv.de/tis_e/misc/allelo.htm
This is a very interesting site.
However, I believe that it will change several important things in my experiment.
DARN!
Okay, I will get down to modifying my experiment now.
This is a very interesting site.
However, I believe that it will change several important things in my experiment.
DARN!
Okay, I will get down to modifying my experiment now.
Part B of my Experiment [aka: HOW PLANTS WILL DIEE!!!]
[Note: All allelopathy & allelopathic traits mentioned in this entry are negative, unless mentioned otherwise. Hehe.]
For Part B of my experiment, I want to record the effects of allelochemicals on different types of plants. I have researched allelopathic plants, and I believe that I should plant sweet potatoes because apparently they are not hard to grow: "In fact, the question is not how to grow sweet potatoes, it's rather how to stop sweet potato vines from taking over the whole garden!" and "...sweet potatoes grow with little water and fertiliser." - Source: http://www.tropicalpermaculture.com/growing-sweet-potatoes.html
Well, that's certainly convenient. Whoo! 8D
Furthermore, all I need to grow them are some cuttings about 30cm long. They should be quite easy to obtain from a gardening place like Flower Power, or something.
However, they should take about two and a half to three months to mature in warm weather, longer in cooler weather - and that period is from planting to maturity. Obviously, since I only have 3 months and I still need time to write up my results, conclusion, discussion, etc. I will have to modify my experiment so that maybe I do not start right from the planting of the sweet potatoes, or I will only record my observations for two and a half months.
I think that I would rather record my observations for two and a half months.
Anyway, as mentioned in my previous post:
"I think I want a range of different plants - I researched modern classifications of plants, and one method of classifying them was by the way the plants took in water - whether they get water from the ground through their roots or simply absorb water through their surfaces (leaves, etc.)."
But I want a range of different plants based on their different structures, so I can see the effects of allelochemicals on a variety of plants. Because of this, I think that I should plant two sweet potatoes - one far Part A, with one vascular plant and one non-vascular plant; and the second for Part B, with different types of plants planted around it. My initial idea for "different types of plants" was: a flowering plant, a cactus and a leafy plant. But I'm not sure if they sufficiently cover a wide range of general plants.
Anyhow, I will plant these around the sweet potato, and observe the effect of the allelochemicals on them, along with taking photos just like Part A of my experiment.
On a different subject, according to my research, not all allelochemicals affect every plant the same way.
"The black walnut (Juglans Ingra) produces the allelochemical juglone, which affects some species greatly while others not at all." - Source: http://en.wikipedia.org/wiki/Allelopathy
In this particular case with the sweet potatoes:
"The allelopathic substances in sweet potato were identified as coumarin, trans-cinnamic acid, o-coumaric acid, p-coumaric acid and chlorogenic acid." - Source: http://www.cababstractsplus.org/abstracts/Abstract.aspx?AcNo=20043010129
For Part B of my experiment, I want to record the effects of allelochemicals on different types of plants. I have researched allelopathic plants, and I believe that I should plant sweet potatoes because apparently they are not hard to grow: "In fact, the question is not how to grow sweet potatoes, it's rather how to stop sweet potato vines from taking over the whole garden!" and "...sweet potatoes grow with little water and fertiliser." - Source: http://www.tropicalpermaculture.com/growing-sweet-potatoes.html
Well, that's certainly convenient. Whoo! 8D
Furthermore, all I need to grow them are some cuttings about 30cm long. They should be quite easy to obtain from a gardening place like Flower Power, or something.
However, they should take about two and a half to three months to mature in warm weather, longer in cooler weather - and that period is from planting to maturity. Obviously, since I only have 3 months and I still need time to write up my results, conclusion, discussion, etc. I will have to modify my experiment so that maybe I do not start right from the planting of the sweet potatoes, or I will only record my observations for two and a half months.
I think that I would rather record my observations for two and a half months.
Anyway, as mentioned in my previous post:
"I think I want a range of different plants - I researched modern classifications of plants, and one method of classifying them was by the way the plants took in water - whether they get water from the ground through their roots or simply absorb water through their surfaces (leaves, etc.)."
But I want a range of different plants based on their different structures, so I can see the effects of allelochemicals on a variety of plants. Because of this, I think that I should plant two sweet potatoes - one far Part A, with one vascular plant and one non-vascular plant; and the second for Part B, with different types of plants planted around it. My initial idea for "different types of plants" was: a flowering plant, a cactus and a leafy plant. But I'm not sure if they sufficiently cover a wide range of general plants.
Anyhow, I will plant these around the sweet potato, and observe the effect of the allelochemicals on them, along with taking photos just like Part A of my experiment.
On a different subject, according to my research, not all allelochemicals affect every plant the same way.
"The black walnut (Juglans Ingra) produces the allelochemical juglone, which affects some species greatly while others not at all." - Source: http://en.wikipedia.org/wiki/Allelopathy
In this particular case with the sweet potatoes:
"The allelopathic substances in sweet potato were identified as coumarin, trans-cinnamic acid, o-coumaric acid, p-coumaric acid and chlorogenic acid." - Source: http://www.cababstractsplus.org/abstracts/Abstract.aspx?AcNo=20043010129
Part A of my Experiment [aka: DIE, PLANTS, DIE!!!]
Posted by
Raychelle
/
Labels:
allelochemicals,
allelopathy,
observations,
other plants
/
Comments: (0)
[Note: All allelopathy & allelopathic traits mentioned in this entry are negative, unless mentioned otherwise. Hehe.]
For Part A, I want to investigate IF negative allelopathy actually occurs; and, if so, WHEN and WHERE the allelopathic plant secretes its allelochemicals. I looked up examples of plants that use allelopathy [on Wikipedia, I admit, but also on sites like this one: http://apps.caes.uga.edu/sbof/main/lessonPlan/allelopathy.pdf]; and the plants that use allelopathy include: black walnut trees, sagebrushes and desert shrubs. Thus, it looks like the easiest plants for me to use are either sweet potatoes, alfalfa or sunflowers....perhaps I will use two of the three, to see the effect of two different allelopathic (yes, that is a word. I looked it up.) plants on each other. But I will research more about the different types of allelochemicals they release, and when they release them, before deciding which ones to plant close together.
The next biggest question is: which plants should I test for where the allelochemicals are released? That is, which non-allelopathic plants should I place near the allelopathic ones to see what happens to the non-allelopathic plants? I think I want a range of different plants - I researched modern classifications of plants, and one method of classifying them was by the way the plants took in water - whether they get water from the ground through their roots or simply absorb water through their surfaces (leaves, etc.).
"Plants are either vascular or non-vascular. Vascular plants have tube-like structures that transport water from the roots to the stem to the leaves. Non-vascular plants absorb water only through their surfaces." - Source: http://www.fi.edu/tfi/units/life/classify/classify.html
I believe that it will be helpful to have both a vascular and non-vascular plant that are non-allelopathic so that I can tell whether the allelopathic plant releases its allelochemicals into the ground (in which case the vascular plants would be more affected) or into the air or somewhere else. If the allelochemicals are released into the air, I believe that the non-vascular plant will be more affected by it.
In this case, the independent variable would be if the allelochemicals are actually released. The dependent variable will be the effect on the other plant - how its will growth be impacted on by the allelochemical, and things like that.
I will take observations on the plants every few days, as I said in my last entry....perhaps every 4 days? I'll also take photos, because I want to know when the allelopathic plants start to produce allelochemicals - according to my research, it could be when the plant is actively growing OR even when it's decaying. Does that mean I will have to kill the plants at the end of my experiment and wait until it decays to see the effects of the allelochemicals? I really hope not....that would be really troublesome. =="
BUT I think I will modify my experiment to see when the allelochemicals are released in the lifespan of a plant. That would be better. :D
Since it is March right now, I still have three months to get started on this experiment. It should be enough time.
For Part A, I want to investigate IF negative allelopathy actually occurs; and, if so, WHEN and WHERE the allelopathic plant secretes its allelochemicals. I looked up examples of plants that use allelopathy [on Wikipedia, I admit, but also on sites like this one: http://apps.caes.uga.edu/sbof/main/lessonPlan/allelopathy.pdf]; and the plants that use allelopathy include: black walnut trees, sagebrushes and desert shrubs. Thus, it looks like the easiest plants for me to use are either sweet potatoes, alfalfa or sunflowers....perhaps I will use two of the three, to see the effect of two different allelopathic (yes, that is a word. I looked it up.) plants on each other. But I will research more about the different types of allelochemicals they release, and when they release them, before deciding which ones to plant close together.
The next biggest question is: which plants should I test for where the allelochemicals are released? That is, which non-allelopathic plants should I place near the allelopathic ones to see what happens to the non-allelopathic plants? I think I want a range of different plants - I researched modern classifications of plants, and one method of classifying them was by the way the plants took in water - whether they get water from the ground through their roots or simply absorb water through their surfaces (leaves, etc.).
"Plants are either vascular or non-vascular. Vascular plants have tube-like structures that transport water from the roots to the stem to the leaves. Non-vascular plants absorb water only through their surfaces." - Source: http://www.fi.edu/tfi/units/life/classify/classify.html
I believe that it will be helpful to have both a vascular and non-vascular plant that are non-allelopathic so that I can tell whether the allelopathic plant releases its allelochemicals into the ground (in which case the vascular plants would be more affected) or into the air or somewhere else. If the allelochemicals are released into the air, I believe that the non-vascular plant will be more affected by it.
In this case, the independent variable would be if the allelochemicals are actually released. The dependent variable will be the effect on the other plant - how its will growth be impacted on by the allelochemical, and things like that.
I will take observations on the plants every few days, as I said in my last entry....perhaps every 4 days? I'll also take photos, because I want to know when the allelopathic plants start to produce allelochemicals - according to my research, it could be when the plant is actively growing OR even when it's decaying. Does that mean I will have to kill the plants at the end of my experiment and wait until it decays to see the effects of the allelochemicals? I really hope not....that would be really troublesome. =="
BUT I think I will modify my experiment to see when the allelochemicals are released in the lifespan of a plant. That would be better. :D
Since it is March right now, I still have three months to get started on this experiment. It should be enough time.
ALLELOPATHY!
SO! I have finally decided to investigate negative allelopathy - a naturally occurring phenomenon in which some plants, algae, bacteria, coral and fungi release chemicals (called allelochemicals) that affect the growth and development of plants near them in a bad way. The site that gave me inspiration for this was:
http://chemistry.about.com/od/sciencefairprojects/a/sciprohigh.htm
I looked up "science fair projects" on the internet, as Ms Zhang said we should if we needed ideas.
I talked to Ms Zhang about my idea at the canteen the other day, and I got to see Ms Zhang have a brainfreeze. It was fun. >:D
Okay. Although it was fun; sorry, Ms Zhang. :D
But she said that my idea was okay, I just had to think it through more. I want to investigate if the allelopathic plants actually secrete/release allelochemicals, and I think I will do that by planting other plants near an allelopathic plant. I'll take observations every few days, and that way I will find out if the allelopathic plant affects plants around it. Should I plant the allelopathic plant first, though? And the non-allelopathic plants after, so I can see how well they grow? I'm not sure. Too many questions and choices!! Argh!
OH! Also, Ms Zhang told us in her email that we need to show "whether we have thought through several different project designs". Will it be okay if I simply add a Part A and Part B to my experiment? Then I will have thought through two project designs....
I can't think of any other project designs that check if allelopathy actually occurs.
So is that okay? I've looked at other people's blogs, and most of the time they've only thought of one way to do their experiment. I hope my stuff's okay.
http://chemistry.about.com/od/sciencefairprojects/a/sciprohigh.htm
I looked up "science fair projects" on the internet, as Ms Zhang said we should if we needed ideas.
I talked to Ms Zhang about my idea at the canteen the other day, and I got to see Ms Zhang have a brainfreeze. It was fun. >:D
Okay. Although it was fun; sorry, Ms Zhang. :D
But she said that my idea was okay, I just had to think it through more. I want to investigate if the allelopathic plants actually secrete/release allelochemicals, and I think I will do that by planting other plants near an allelopathic plant. I'll take observations every few days, and that way I will find out if the allelopathic plant affects plants around it. Should I plant the allelopathic plant first, though? And the non-allelopathic plants after, so I can see how well they grow? I'm not sure. Too many questions and choices!! Argh!
OH! Also, Ms Zhang told us in her email that we need to show "whether we have thought through several different project designs". Will it be okay if I simply add a Part A and Part B to my experiment? Then I will have thought through two project designs....
I can't think of any other project designs that check if allelopathy actually occurs.
So is that okay? I've looked at other people's blogs, and most of the time they've only thought of one way to do their experiment. I hope my stuff's okay.
What to do for the SRP? To do or not to do..... :)
I've been thinking, and perhaps I'll do one of the projects suggested by Ms Zhang. That would decrease the chance that my experiment is not suitable for the SRP, and also then I would know what exactly to do.
Maybe I'll investigate the most effective way of dyeing eggs for Easter....mmmm eggs. ;)
I rather like food. :D
OR I could design an effective smoke alarm for the deaf! That actually sounds pretty cool. Designing, though......I really don't know. Heh.
Still thinking. This is hard! But I gotta remember it has to be done by June....
Maybe I'll investigate the most effective way of dyeing eggs for Easter....mmmm eggs. ;)
I rather like food. :D
OR I could design an effective smoke alarm for the deaf! That actually sounds pretty cool. Designing, though......I really don't know. Heh.
Still thinking. This is hard! But I gotta remember it has to be done by June....